dodge bearing,dodge bearings manufacturer and dodge bearing,dodge bearings supplier--China Ningbo DHK Precision Bearing Co., Ltd.

	Bearing
	>>Ball Bearing
	>>Roller Bearings
	>>Precision Machine Tool Bearings
	>>Automotire Bearings
	>>Insert Bearing Units
	>>Forklift Bearings
	>>Track Rollers Bearings

Combined bearings, by screw adjustable, for steel sections

The combined bearings are manufactured according to the Unified Parameters which govern a correct execution of rolling bearings. dodge bearing, dodge bearings

This series can be supplied both in re-lubricable version and in the sealed performance. The outer rings are normally scheduled in correct convex performance to counteract the inevitable geometrical errors originating from the coupling with the guide ways in which they roll.

The axial adjustments of 1 or 2 degrees provide the recovery of the clearances arising from the heavy applications of the lift trucks.

The axial part, in plastics, can be used in case of limited rolling speed.

Bearings are greased at source with grade "3" lithium base grease. For special performances, as the use of these bearings at high temperatures, please inquire our engineering service. dodge bearing, dodge bearings

DHKI		Dimensions
ZZ	d	D	C	H_min	H_max	H_1min	H_1max	H₂	D₁	C₁	D₂	d₁	@	r
ZZ	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	Degrees	mm



MR.961⁽¹⁾⁽²⁾	30	62	20	38	40	30,5	32,5	7	50	-	26	42	20°	3
MR.962⁽²⁾	35	70,1	23	38,5	40,5	31,5	33,5	7	57	-	30	48	20°	3
MR.963⁽²⁾	40	77,7	23	40,7	42,7	31,7	33,7	9	61	-	30	54	20°	3
MR.964⁽⁶⁾	45	88,9	30	48,5	51	36,5	39	12	68	21	33	59	20°	4
MR.965⁽³⁾⁽⁶⁾	50	101,9	28	46	48,5	33	35,5	13	77	24	38	67	20°	4
MR.966⁽⁶⁾	55	107,7	31	53,5	56,5	41,5	44,5	12	82	30	42	71	20°	4
MR.967⁽⁶⁾	60	123	33	61,5	64,5	49,5	52,5	12	94	30	42	80	15°	4
MR.968⁽⁶⁾	60	149	43	75,5	79	58,5	62	17	116	45	63	103	15°	4

					Load ratings				Speed	Mass
R	R1	V	V₂	V₃	C	C₀	C_A	C_0A	Grease	Kg
mm	mm	mm	mm	mm	KN	KN	KN	KN	rev./min



500	500	2,5	-	M10	31	35,5	-	-	900	0,52
500	500	3	M6X1	M10	45,5	51	-	-	900	0,60
700	700	4	M6X1	M10	48	56,8	-	-	800	0,82
700	700	4	M6X1	M10	68	72	15	15	700	1,43
850	700	2,5	M6X1	M10	73	82	18	19	700	1,70
1000	700	6	M6X1	M16	81	95	31	36	650	2,45
1000	1000	6,5	M6X1	M16	110	132	31	36	500	3,50
1000	1000	6,8	M6X1	M10	151	192	68	71	400	6,50

(1) Non relubricable
(2) With plastic axial support only
(3) Taper outer (D) profile
(4) Dimension ¡°S¡± adjustable by means of screw UNI 5929-DIN 916
(5) References
(6) For the axial support in ortolan: suffix F (ex. MR¡¡/F)

BACK

bearing